Cruiser - Rosewood G10

We got crazy with the Weasel Twin mold and tested out Cruiser shapes until we landed on one that will absolutely terrorize spots. This shit is ridiculously functional for a shaped deck (and looks cool af). This deck could easily be a quiver of one. It's 37.5mm at the widest point but tapers down, so it works well with 34mm trucks.

This Cruiser has a G10 glass ply in the middle. It's the same stuff they make knife and gun handles out of. It's tough as nails and as close to indestructible as we've come with a fingerboard deck. This time, instead of the bottom, we put that shit in the middle.  You get all the familiar cozy feelings of hard wood on your fingers, with so much extra stiffness, you'll need an onion browser to see the photos we took of it. 

This is the gnarliest deck we make. They take a lot of extra time and effort, but the feeling of one of these is totally worth it. The ply layup is unconventional with two 45 degree rosewood plies sandwiched with two lengthwise plies and the G10 layer right in the middle. This is the formula for unrivaled pop and torsional stiffness! Seriously, take a deck you have, and one of these, twist em both, and feel the unrivaled nastiness of the G10.

This fingerboard deck is a cruiser inspired shape with switch/nollie friendly kicks and a slightly lower concave. This shape is perfect for skating and filming lines with shuvits/varials/hardflips, etc.

Long pressed with polyurethane glue in 7075 aluminum molds with 1 ton hydraulic pressure. Sanded and finished by hand. Graphics are printed and applied in-house as heat transfers.

Comes with a sheet of Rat Trap Sticky Tape.

Specs:

- 24.5 degree medium angle twin nose/tail

- 18.5mm twin nose/tail

- 1.75mm "schmedium" concave (at 34mm)

- 57mm wheelbase

- WeaselTech pockets

- Ultra mega deluxe crispy and responsive